 NHRC-4/M2
|
NHRC-4/M2 Repeater Controller
An Integrated Linking Repeater Controller
for General Electric MASTR II Radios
The NHRC-4/M2 is a version of our popular
NHRC-4 Repeater Controller
that plugs in to the GE MASTR II.
|
![[Picture of NHRC-4/M2 Controller]](nhrc-4m2-small.jpg)
Click image to view a bigger picture.
|
Features:
- Plugs in inside a General Electric MASTR II mobile with no complicated
wiring. Fits in Base Stations, too!
- Secondary port can be remote base, link radio or slaved duplex repeater.
- "Intelligent" ID algorithm.
- A single connector interfaces a CommSpec TS-64 (not supplied) for
full CTCSS encode and decode on the primary (MASTR II) port.
- Distinctive Courtesy Tones can indicate channel activity:
- primary receiver courtesy tone.
- primary receiver courtesy tone, secondary port transmit enabled.
- secondary receiver courtesy tone.
- secondary receiver courtesy tone, secondary port transmit enabled.
- primary receiver courtesy tone, secondary receiver active, alert mode selected.
- 1 Digital output:
- Fan control (runs when transmitter on and n minutes after).
- On/Off/Pulse commands.
- Open-collector output.
- Touch-Tone remote control and programming.
- Hang timer, ID timer, Timeout timers, Fan Timer, and CW messages stored in non-volatile memory.
- Individual audio gating on each port allows use of non-squelched receiver audio.
- LED
CAS,
PTT,
and DTMF indicators
for primary port.
CAS and
PTT indicators for secondary port.
- Both ports support optional NHRC-DAD digital audio delay for squelch tail
elimination/reduction and total muting of DTMF.
- Extremely low power consumption.
Documentation:
Version 3.0 Manuals
Prior Versions Manuals
Accessories:
Pricing:
NHRC-4/M2 |
Integrated Linking Repeater Controller
for GE MASTR II Mobiles and Base Stations. |
$189.00 |
NHRC-4 Version 3.0 Upgrade |
Includes new microcontroller IC and printed documentation |
$29.00 |
Shipping & Handling |
|
See Shipping Info |
|
|